PTFE Coated Release Tapes & Fabrics

Composite Molding
Release Materials

 

Taconic PTFE coated fiberglass tapes and fabrics provide cost-effective release surfaces for hand lay-up, open mold composites, and other demanding composite molding applications. These materials help create a clean, nonstick interface between the mold or tool and the composite part.

PTFE coated fabrics act as flexible release liners that conform to the mold surface, while PTFE coated tapes are ideal for lining tools and complex shapes where conformability and secure placement are important during curing.

Taconic PTFE coated composite molding release tapes and fabrics for wind turbine blades
Key Benefits: Clean Mold Release Flexible & Conformable Multiple Pull Potential Reduced Prep & Cleanup High Temperature Rated Bleeder & Peel-Ply Options
 

Product Lineup

From mold line to
finished part — cleaner.

Taconic offers PTFE coated tapes and fabrics for mold release, peel-ply, bleeder cloth, release fabric, and nonstick fabrication work surface applications.

Taconic 6085 series PTFE coated fiberglass composite mold release tape
 

6085 Series

PTFE coated fiberglass mold release tapes available in multiple thicknesses for composite molding applications.

Mold Release Tape Silicone Adhesive
Taconic 6095 series PTFE mold release tape for composite manufacturing
 

6095 Series

Mold release tapes designed to provide clean release and consistent performance in composite manufacturing.

Clean Release Composite Molding
Taconic 6445-02 thin conformable PTFE composite mold release tape
 

6445-02

Thin PTFE coated mold release tape for applications requiring a conformable release surface.

Thin Construction Conformable
Taconic 7025 PTFE coated bleeder cloth and peel-ply for composite processing
 

7025

PTFE coated material used for bleeder cloth and peel-ply applications in composite processing.

Bleeder Cloth Peel-Ply
Taconic 7038 PTFE coated release fabric for composite molding
 

7038

PTFE coated release fabric for composite molding and release surface applications.

Release Fabric PTFE Coated
Taconic composite molding release materials for aerospace and aviation applications
 
 

Where These Materials Work

From boat hulls to turbine blades —
wherever release matters.

Taconic PTFE coated tapes and fabrics are used across a wide range of composite molding and fabrication applications requiring dependable release, smooth finished surfaces, and consistent process performance.

Boat Hulls & Decks
Bulkheads
Helicopter Rotor Blades
Wind Turbine Blades
Composite Parts
Open Mold Processing
Hand Lay-Up
Fabrication Work Surfaces
 
 
 

Why Taconic

Less prep.
Better parts.
Every pull.

Reliable Mold Release

PTFE coated tapes and fabrics provide a consistent release surface that helps molded parts release cleanly from tooling, reducing surface defects and reject rates.

Reduced Prep & Cleanup

Taconic release materials help reduce prep time, finish work, cleanup, and the need for waxes or chemical release agents.

Flexible & Conformable

PTFE coated fabrics conform to molds, while PTFE coated tapes stay firmly in place on tools and complex shapes during curing.

Multiple Pull Potential

In many applications, Taconic PTFE coated tapes and fabrics may last for several pulls from the mold, lowering overall material cost.

 

Industries Served

Where part quality
is non-negotiable.

Composite molding release products support manufacturers across industries where part quality, process consistency, and release performance are critical.

  • —Aerospace
  • —Renewable Energy
  • —Automotive
  • —Marine
  • —Construction
  • —Sports & Recreational Equipment
  • —Military
  • —Ballistics Protection
  • —Civil Infrastructure Repair
 

Product Guide

The right release material
for your mold and process.

General product guide for composite molding release tapes, bleeder cloth, peel-ply, and release fabrics. All products rated -100°F to 500°F.

Product Number Overall Thickness (in) Adhesive Thickness (in) Adhesive Type Adhesive Strength (oz) Application
Mold Release Tapes
6085-03 0.005 0.002 Silicone 40 Mold Release Tape
6085-05 0.007 0.002 Silicone 45 Mold Release Tape
6085-06 0.008 0.002 Silicone 50 Mold Release Tape
6095-03 0.005 0.002 Silicone 40 Mold Release Tape
6095-05 0.007 0.002 Silicone 50 Mold Release Tape
6095-06 0.008 0.002 Silicone 50 Mold Release Tape
6445-02 0.004 0.002 Silicone 25 Mold Release Tape
Release Fabrics
7025 0.0025 N/A N/A N/A Bleeder Cloth & Peel-Ply
7038 0.0028 N/A N/A N/A Release Fabric

This product guide is intended for comparison and selection support. Min/Max Operating Temp: -100°F to 500°F for all products listed above. Contact Taconic for recommendations based on your mold geometry, resin system, temperature exposure, release requirements, and processing conditions.

 

Ready to Improve Your Release Process?

Cleaner pulls start with
the right release material.

Contact Taconic to discuss your composite molding process, mold geometry, release requirements, temperature exposure, and product needs.

Contact Taconic